Wuxi Huipu Auto Parts Factory
The production process of auto rubber buffer for GM mainly includes six basic processes: mastication, mixing, calendering, extrusion, molding and vulcanization. Of course, basic procedures such as raw material preparation, finished product finishing, and inspection and packaging of GM rubber buffer blocks are also indispensable.
First, when preparing raw materials, auto rubber buffer for GM should first determine their basic materials, and then add auxiliary materials to improve certain properties of rubber products. Finally, it is used as a skeleton material for rubber products to enhance mechanical strength and limit product modification. Note that the ingredients must be weighed accurately according to the formula during the preparation of the raw materials. In order to allow the raw rubber and the compounding agent to be uniformly mixed with each other, the material needs to be processed.
Usually after selecting the basic material of GM rubber buffer block, it should be cut, broken into small pieces, and then add appropriate amount of compounding agent. If the compounding agent is to be dried, it is easy to agglomerate, and if it is not possible to disperse and uniformly vulcanize, it will affect the product quality.