Wuxi Huipu Auto Parts Factory
Auto rubber buffer for Toyota can limit the maximum deformation of the suspension when in use. It reduces the direct impact of the axle on the frame (or body) and prevents excessive deformation of the elastic components. The buffer block is composed of a rubber block, a steel plate, and a bolt. Some buffer blocks are made of porous polyurethane and are hollow inside.
Technical characteristics of auto rubber buffer for Toyota
Most of Toyota's rubber bumpers are made of porous polyurethane material, and rubber materials are gradually being replaced. The porous buffer block made of polyurethane material has the advantage that the following rubber can not be replaced: the mass is small, about 1/2 deformation of the rubber buffer block of the same size, and has good nonlinear characteristics.
The construction principle of auto rubber buffer for Toyota
Toyota rubber cushions are mainly composed of rubber blocks, steel plates and bolts. Some buffer blocks are made of porous polyurethane and are hollow inside.
Toyota car rubber buffer block application
The structure of the buffer block is that the vulcanized rubber is integrated with the steel plate, bolted to the steel plate, and then the buffer block is fixed on a part of the frame (body) to limit the suspension travel.